SEAL-KRETE® 2-Part High Performance Urethane is a premium two-component water based coating.
Designed for interior and exterior applications, it provides an excellent chemical resistant, high gloss finish in a low VOC formula. It is available in light gray, dark gray and a clear that can be applied directly to many surfaces without the need of a primer, i.e., metal, concrete, wood, aluminum and galvanized metal. Upon mixing Parts A & B the product is Isocyanate free. The material is NSF approved for use at USDA facilities of incidental food contact. SEAL-KRETE 2-Part High Performance Urethane meets the SCAQMD requirements of less than 50g/l (EPA Method 24) and is widely used by food & beverage and pharmaceutical facilities on walls, floors, equipment and clean rooms, as well as amusement parks, refineries, power industry, storage tank exteriors, pipelines, wastewater facilities, commercial buildings and as an anti-graffiti system.
For a more decorative appearance, apply decorative paint flakes to final coat of SEAL-KRETE 2-Part High Performance Urethane Light or Dark Gray Coatings. Apply the material in 4’ x 4’ sections so that the decorative paint chips can easily be broadcast over the final coat. Allow to dry 24 hours. Apply one coat of SEAL-KRETE 2-Part High Performance Urethane Clear to lock in the paint flakesand facilitate cleaning.
• NSF approved for use at USDA facilities of incidental food contact
• Meets the SCAQMD requirements of less than 50g/l
• Can be used as an anti-graffiti system
• Can be used on concrete, steel, aluminum and galvanized metal
2-Part Water Based High Performance Urethane Pre-Mixed Colors
| |
|
 |
|
 |
|
|
Light Gray
222001 |
|
Dark Gray
223001 |
Recommended Prep / Application Products
Decorative Paint Flakes
Clean-n-Etch - Cleans and prepares bare concrete floors
OSR Oil Stain Remover
Acid Etching with muriatic acid
Data / Spec and MSDS Sheets
Click here for Full Data Sheet (pdf)
Click here for MSDS Part A (pdf)
Click here for MSDS Part B (pdf)
Specification for Seal-Krete 2-Part Urethane
Where to Buy
Please click here to send us an email
| Best
for |
Bare Concrete, Previously painted surfaces |
| Limitations |
Not designed for immersion or where moisture can reach the underside of the coating. See data for full limitations |
| Coverage |
Approx. 250 - 400
sq.ft. per gallon |
| Gloss
/ Sheen |
Satin - Gloss |
| VOC |
<30g per liter |
| Size |
1 gallon kit |
| Application |
Airless, Roll, Brush |
| Product Number |
Unit size |
UPC Code |
Case
Qty |
Carton
Size |
Carton
Size |
Carton
Weight (lbs) |
Pallet Qty |
221001
Urethane Clear Gloss Kit |
1-gal |
0
15944 22101 5 |
1 |
12.5x7.25x8.75 |
.46 cubed |
11.12 |
75 cases |
222001
Urethane Lt. Gray Gloss Kit |
1-gal |
0
15944 22201 2 |
1 |
12.5x7.25x8.75 |
.46 cubed |
11.12 |
75 cases |
223001
Urethane Dk Gray Gloss Kit |
1-gal |
0
15944 22301 9 |
1 |
12.5x7.25x8.75 |
.46 cubed |
11.12 |
75 cases |
|